Capture room measurements with SketchCam

Updated by Heather Jones

  1. Stand at the mid-point of the wall, a few feet away from the wall. Hold the device in the same position as when you calibrated.
  2. Point the device at the first corner where the floor meets the walls, and then tap .
  3. While maintaining your position, move the device along the floor to the next corner, and then tap to mark the second corner.
  4. After the first two corners are marked, you can reposition yourself to capture the next wall.
  5. 5. When all corners have been captured, and you are satisfied with the room from the Preview box, tap. Your room appears on the Sketch workspace.

How Did We Do?